12" Self Manoeuvering Cutter Suction Dredger
Principal dimensions
| Length of main pontoon | 12,00 m |
| Length of assembled pontoons | 13,00 m |
| Width of assembled pontoons | 5,90 m |
| Depth | 1,50 / 1,85 m |
| Draft, ready for service | 1,00 m |
| Suction pipe diameter | 300 mm |
| Dredging depth at angle 45° for ladder | 10,00 m |
| Fuel capacity | 1.800 litres |
| Cutter speed (variable speed) | 0-55 rpm. and reverse |
| Cutter power | 45 kW / 60 hp |
| Main engine Caterpillar | 340 kW / 462 hp |
| Transportable by road | Yes |
| Biggest part for transport (main pontoon) | 13,60 x 2,50 x 2,50 m. & 35 ton |
This 12" self manoeuvring cutter suction dredger is mainly used for maintenance dredging jobs in marina's, but can also be used successfully in canals, rivers, and lakes. It is a multi-purpose type with bigger pontooning and bigger cabin compared to the 10" SM CSD-250 and therefore this machine is so very popular for contractors that contract many different marina's connected to the open sea. Sand and clay cutters can be mounted, dredging depth can be adapted, cutting tools can be changed, and various working methods can be chosen. Spuds are equipped with hydraulic chain drive which enable the operator to actively hoist and push the spuds for controlled hoisting and good bottom penetration. Optionally a spud carriage can be installed. These 12" SM CSD-300 were delivered to many countries around the world, pictures show dredgers supplied to Belgium and United Kindom. Marina's are kept clean and accessible to sailing yachts.
Features general:
- One man operation from comfortable low noise operation cabin
- Dismountable and transportable by road, overseas transport in containers
- Hull consists of multiple pontoons connected by proven coupling system
- Bollards for mooring on all corners of the dredger
- Marine coating system and cathode protection for optimum protection
- Highly efficient fuel consumption and overall operational costs
- Closed fresh water inter cooling system
- Completely assembled and fully tested before delivery
- Very simple and fast assembly, afloat or onshore
- Ready for operation on arrival at site
- Standard design, allowing short delivery times
- Designed as standard to quality for Inland Waters Certificate
Dredging equipment:
- Double walled dredge pump with mechanical seal on shaft
- Standard highly effective cutter drive system
- Multi-purpose and various special cutters and auger heads available
- Davit for handling of pump parts can be positioned in various places
- Standard spare parts available from stock
- Standard winches and optional equipment available
Optional equipment
- Spud carriage pontoon
- Increased dredging depth
- Floating- and shore discharge pipe line
- Air conditioning
- Production measuring equipment
- Position measuring equipment GPS
- Harbour generator set
All data are indicative and subject to change.